The following questions test your knowledge of topics explained in this chapter. You can find the answers to the questions in Appendix A, "Answers to Chapter Review Questions."
| 1. | Which two functions does a gateway provide?
Translation between the VoIP and PSTN network Physical access for analog telephones and fax machines Power over Ethernet to the IP phone
|
| 2. | Which protocol provides out-of-band control information for RTP-based call flows?
|
| 3. | A company has four sites and wants to implement VoIP at all of them. The requirements include implementing gateway devices with no call-processing intelligence at the remote sites, controlling all call traffic from the headquarters location, and having a single point of CAC. Which network architecture is appropriate to meet these requirements?
H.323 gateway architecture
|
| 4. | In which of the following situations would a gateway be required?
Cisco CallManager-to-IP network connection PBX-to-voice mail connection Key system-to-IP network connection
|
| 5. | Which function best describes a numbering plan?
Determines routes between source and destination Defines a telephone number of a voice endpoint or application Performs digit manipulation when sending calls to the PSTN Performs least-cost routing for VoIP calls
|
| |
| 6. | Which worldwide prefix scheme was developed by the ITU to standardize numbering plans?
|
| 7. | Which three factors must be considered when calculating the total bandwidth of a VoIP call?
Capacity of network links
|
| 8. | What is the overhead for Frame Relay?
|
| 9. | What is the equivalent of one Erlang?
|
| 10. | Which feature provides transport security for a VoIP network?
Encryption and data authentication Inspection of traffic at the firewall Proactive notification of an attempted attack
|
